Inżynieria Rolnicza
Home page
Place of Work
Summarys :
Sort by :
Titles Dates
1 # 3056
Analysis of the threshing spelt process in the blade-sieve threshing unit
10 # 1478
Durability of cultivator coulters
10 # 1481
Method to grain losses optimization in the process of combine harvesting of the cereals
10 # 1480
The quality of produced haylage as affected by the moisture content of green crop treated with microbioiogical-enzimatic additive and harvested with a rolling baler
100 # 2106
Analysis of the justness of using the computer system for managing a herd of cows, ALPRO, in the light of economic indices
100 # 2108
Computer applications for the evaluation of selected sensory parameters of agricultural and food products
100 # 2070
Effect of selected factors on non-uniformity of triticale seeds dosage with pin sowing unit
100 # 2085
Effects of the method and time of storing on the selected sensory characteristics of apples
100 # 2076
Evaluation of the level of technical infrastructure development
100 # 2087
Operating costs for storage buildings and structures in farms characterised by vari-ous farm production types
100 # 2109
The use of image processing methods to evaluate the fat content of pork
100 # 2100
The use of the computer application TRACE for the evaluation of mobile object identification
100 # 2110
Waste management in a sewage-treatment plant of the sbr type
102 # 2146
Beet pulp ensilage in cylindrical bales
102 # 2142
Comparison of fuel consumption and working time for several alternative technologies of preparing soil for sowing
102 # 2152
New solutions concerning the construction of teat gums
102 # 2155
Technical aspects of the rational storage of natural fertilizers
102 # 2135
Uniformity of mixing biological plant protection agents in a sprayer tank
103 # 2174
Computer methods applied to support milk cow herd management
103 # 2223
The impact of working parameters of multifunctional cultivation and maintenance tool on service loads
104 # 2254
Assessment of heterogeneous blend with biomass using computer image acquisition
104 # 2255
Assessment technique and statistic modelling of the degree of potato damage caused by Colorado beetle
104 # 2249
Neural analysis of the ultrasonographic images in the intramuscular fat level content identification process – preliminary research
104 # 2231
Quality of brewer’s barley grain dried in a canopy dryer or in a grain elevator
104 # 2248
The impact of the number of variables on the operation quality of neuron model for identifying mechanical damage of corn seeds
105 # 2258
Assessment of the selection of neural network used to show the occurrence and to determine quasiplateau range in volt-ampere-metric soil oxygenation measurements
105 # 2282
Using the canvassing of the image to assessing losses in the nursery of the potato
107 # 2313
Efficiency of solar heat storage system in function of ambient temperature
107 # 2305
Particle size impact on drying shrinkage during microwave and vacuum drying
107 # 2330
The impact of humidity on grain loss and damage during combine harvesting of crops
107 # 2312
The impact of wheat grain storage conditions on germination ability
108 # 2338
Assessment of insecticidal nematoda concentration in working liquid, performed using computer image analysis
108 # 2361
Dependence between qualitative losses of gymnosperm barley seeds and combine harvester control parameters
108 # 2362
Monitoring of the self-heating state occurring during storage of crop seed masses
109 # 2408
Adaptive control for selected class of agricultural engineering processes
109 # 2395
Examination of progress in the process of mixing binary granular pattern using the chimney pour out method
109 # 2400
Management of design documentation multiple versions. Part I. The system concept
109 # 2401
Management of design documentation multiple versions. Part II. The system implementation
109 # 2383
Software tools for risk management in agriculture
109 # 2379
Using neural networks to count insecticidal nematoda
109 # 2397
Using the CCD cameras to control operation of agricultural machinery working units
109 # 2378
Using the labview application to determine the survivability of insecticidal nematoda - biological plant pesticide
110 # 2453
Assessment of cow dung removal and storage in the aspect of employed solutions and equipment on the example of cowsheds in Pomorze Zachodnie region
110 # 2441
Bioenergy - will fields and forests replace coal and oil?
110 # 2440
Reduction of animal production impact on environment
110 # 2426
The impact of potato tuber exposure to microwave radiation on content of some biochemical compounds and dry matter
110 # 2431
Using water heated up in solar collectors for watering tomatoes grown in covered facilities
111 # 2469
Texture changes during storage in different conditions of acidic cottage cheeses obtained using conventional method
111 # 2470
The effect of storage time and conditions on selected mechanical properties of apples
113 # 2373
Innovative method for identifying selected qualitative characteristics of seeds using image analysis and artificial neural networks (ANN)
114 # 2517
Analysis of potential for production of biogas based on liquid manure and corn ensilage
114 # 2503
Automatic valuation of the spraying quality on the basis of drops traces using the computer image analysis
114 # 2523
Discrimination of wheat seed varieties on the basis of geometrical characteristics
114 # 2510
The impact of cultivation simplifications in corn monoculture on formation of topsoil level structure
114 # 2519
Voltage fluctuations in rural electric power networks
115 # 2544
Assessment of the technology involving biogas production from municipal wastes on the example of “Hajdów” sewage treatment plant
115 # 2536
Herd parameters in microclimate design process in buildings for cattle
115 # 2561
Operation quality analysis for potato cleaning roller separator
115 # 2535
Using computer graphics for 3D reconstruction of seeds
117 # 2574
Neural classification of images showing dried vegetables
117 # 2582
Using the cone in cone type insert during chimney pouring out
118 # 2618
Application of virtual instruments to determine microbiological contamination level of liquid food products
118 # 2633
Computer image analysis in the assessment of mixing uniform granular mixtures
118 # 2632
Conversion of digital images into the form of teaching sets for the purposes of neural modelling
119 # 2685
The impact of teat rubber core part on teat massage intensity
119 # 2670
The reason for using corn and fermented liquid manure ensilage for biogas production
120 # 2721
Analysis of limited deleterious substances (pollutants) production by mobile energy sources in agriculture
120 # 2709
Recovery process assessment for selected wastes from operation of automotive vehicles on the example of Moto-Pols company
120 # 2720
Testing a cylinder cleaning separator in process mixture separation conditions during potato tuber sorting process
120 # 2716
The impact of selected sprayer positions on sprayed surfaces coverage degree
120 # 2693
Working life lengths for tractors and machines in selected family-owned farms in lubelskie voivodship
121 # 2736
Assessment of the selection of transport facilities in farms in the aspect of transport distance
121 # 2748
Colour compression impact on operation of a neural identification model
121 # 2730
Information and machine stock management in selected farms in Małopolska Region
121 # 2737
Possession of technical means of production and their use in vegetable farms differing in area
121 # 2744
Potato tuber electric potential
121 # 2740
Rational management of reserves in farmers’ opinion
122 # 2793
Analysis of indicators characterising the quality of voltage in rural power networks
122 # 2782
Analysis of sifting of carrot seeds through sieves of the vibrating screen
122 # 2766
Distribution of working solution for different technologies of application of herbicides in an orchard
122 # 2776
Impact of the period of storage on changes of physical properties of potato tubers
122 # 2765
Method of evaluation of susceptibility of spelt grains to mechanical damages during the threshing process
122 # 2795
Preliminary evaluation of development of semisubsistence farms in years 2005-2008
123 # 2831
Analysis of mechanisation services in ecological farms
124 # 2851
Growth curve functions in modeling the thin-layer drying of corn
124 # 2843
Potato production development in the Slovak Republic and the impact of machinery on product quality
124 # 2848
Stock management in farms characterised by diversified production area
124 # 2853
Two-stage motion of particles in the discharge spout of forage harvester
125 # 2860
A comparison of Cg versus HLSL shaders efficiency
125 # 2865
Application of support vector machines and digital image analysis in carrot roots classification
125 # 2857
Innovative NetApp storage solutions for modern information technology
125 # 2877
The simulation of the heat flow in a stone regenerator with a randomised substrate bed
126 # 2897
Applying sequential procedure in the analysis of geometrical characteristics for seeds of selected cereal plants
126 # 2903
Crop losses and profitability threshold for cereals protection
126 # 2904
Research methodology and preparation of learning datasets for neural networks identifying compost quality
129 # 2969
Evaluating the quality features of frozen foods on the the basis of image canvassing
129 # 2972
Evaluation of the strategy for maintaining agricultural technical means depending on a farm size, based on the example of Małopolskie
129 # 2971
Excess sludge acquisition in a standard sewage treatment plant control system
129 # 2940
The impact of pressure exerted by the grain mass stored in a silo on changes in geometrical parameters of wheat
129 # 2967
The impact of spraying parameters on sprayed objects coverage degree for a selected double stream atomiser
129 # 2941
The potential and use of computer analysis and image processing in the agricultural and food industry
130 # 2985
Analysis of common hawthorn fruit drying in the conditions of reduced pressure with microwave heating. Drying kinetics and drying shrinkage
130 # 2978
Characteristics of selected physical properties of borage seeds in the aspect of their use for the improvement of cleaning process
130 # 3006
Renovation of watercourses on the example of integrated technology developed in the Industrial Institute of Agricultural Engineering
130 # 2999
The influence of power transmission poles located on the field on operational indicators of machine units
130 # 2995
The influence of storehouse microclimate on the qualitative and quantitative indicators as well as on certain features of apples
131 # 3092
3D reconstruction method of seeds in CAD application
131 # 3059
Analysis of the threshing spelt process in the blade-sieve threshing unit
131 # 3093
Programme for registration support and assessment of technological processes
132 # 3106
An analysis of biogas production from grass silage as dependent upon feed quality
132 # 3112
Verifying the properties of grass haylage from anaerobic processing
133 # 3025
Efficiency of borrage seeds cleaning (Borago officinalis L.)
133 # 3048
Influence of selected control quality index on milking parameters in milking units in a milk piepeline
133 # 3027
Optimisation of technical infrastructure of the selected farms with the use of OTR-7 programme
134 # 3122
Analysis of microwave-vaccum drying of cauliflower
134 # 3127
Application of the GPS monitoring system in effective management of agricultural vehicles operation
134 # 3118
Comparison of biogas yield from three types of silage: maize, lucerne and grass silage
134 # 3116
Influence of some factors on age of tractors and farm machines in the selected farms of the middle-Eastern Poland
136 # 3173
Analysis of the course of an automatic dosing process of the chosen poultry fodder ingredients in industrial conditions
136 # 3174
Characteristic of the selected agricultural producer's properties in examining scientific and technological development
136 # 3184
Comparison of a coverage degree of facilities sprayed with the selected air induction sprayer – one and two–stream sprayers
136 # 3166
Storing heat surplus from a plastic tunnel in a rock - bed storage
137 # 3210
Analysis of the course of a dosing process of the fodder elements
137 # 3223
Characteristic of the observed processes and types of exploitation wear of agricultural machinery
137 # 3193
Information technology oriented on spatial data in agriculture management support applications
137 # 3199
Using Drupal CMS for implementation of knowledge management system in plant production
139 # 3284
Exploitation evaluation of GRIMME 170-60SE combine harvester
139 # 3262
Morphometric features of rye caryopses stored in a silo
139 # 3289
Presenting educational materials using images based on examples from multimedia atlas of beef cattle
139 # 3274
Storing infrastructure and its use in the selected agricultural farms in the southern Poland
139 # 3290
Suitability of Magitop corn as a substrate for biogas production based on initial research
139 # 3295
The issue of fatigue evaluation of agricultural machines shown in a multirole unit
140 # 3303
Innovative solutions in potato harvesting techniques
140 # 3307
Materials and commodity flows in farms from the aspect of production simplification
140 # 3316
Production potential and storage space in farms organized in the fruit producers' group
140 # 3309
Robotics in the process of packing greenhouse tomatoes
141 # 3342
Analysis of demand for spare parts on the example of the selected food enterprise
141 # 3352
Effect of the pores distribution in transverse section on textural property of cereal extrudate
141 # 3321
Selected parameters of controlling a multi-degree evaporator for production of fruit juice concentrate
141 # 3323
The effect of the surface development of extrudate on the dynamics of water sorption in various storage conditions
141 # 3339
The use of computer image analysis in the evaluation of selected beef quality features
143 # 3381
Analysis of potential selection decisions of tractors made by the farm owners
143 # 3375
Economic and ecological aspects of ethanol production in small agricultural distilleries
143 # 3363
Potential possibilities for the deveopment of biogas plants on the example of zachodniopomorskie voivodeship
143 # 3367
The Assessment of Damageability of Tractor Power Unit fed with Rapeseed Oil by Method of Event Tree Analysis – ETA
145 # 3403
Fuel consumption in soil tillage depending on its simplification and previous crop in the crop rotation
145 # 3416
Total Productive Management System was applied for rationalization of heat economy in a brewery
146 # 3452
Cathegories and number of tree damage at logging works
146 # 3448
Impact of the crop technology on the index value of mechanical damage to potato tuber
146 # 3439
Relation between biometric properties and the selected electric parameters of potato tubers
147 # 3480
Drying kohlrabi with microwave method in the lowered pressure conditions
147 # 3484
Variability of the air flow velocity in the heat accumulator with a stone bed depending on the structure of the air distribution system
148 # 3516
Influence of freezing treatment, osmotic dehydration and storage time on the rehydration of vacuum dried strawberries
148 # 3524
Quality and nutritional value of silage made of meadow grass mowed with and without conditioners
149 # 3534
Analysis of possibilities of obtaining essential oils from herbaceous plants waste
149 # 3545
Possibilities of using biomass for energy purposes
149 # 3552
Spray application quality as affected by spray volume, nozzles and phenological growth stage of apples
149 # 3539
Unevenness of spraying objects with selected one and double-stream nozzles
150 # 3559
Analysis of data of organic farms with the use of non-standard reports in Gekko software
150 # 3555
Analysis of municipal waste collected by the selected waste management establishments
150 # 3566
Minimization of labour inputs in early cabbage production technology
151 # 3587
Analysis of the selected factors impact on the amount of stored heat and the mass change in the rock-bed storage placed in the laboratory tunnel
151 # 3594
Impact of organic additives on biogas efficiency of sewage sludge
151 # 3586
Level and effectiveness of use of delivery trucks and trucks in the selected horticultural farms
152 # 3623
Analysis of effectiveness of storing waste heat in the water accumulator
152 # 3613
Automatic indexing of information resources concerning agriculture in Polish
152 # 3621
Expert systems as a tool for decision support in integrated pest management
152 # 3625
High-Frequency Trading of agricultural commodities as a source of additional income in agriculture
152 # 3607
Quality assessment of the operation process of the HEID technological line threshing unit for corn cobs
153 # 3639
Relation between the content of simple sugars in a potato tuber and its resistance to mechanical load
154 # 3648
Evaluation possibilities of chicken manure in Turkey
154 # 3658
The use of morphological analysis in the wheat quality feature extraction
155 # 3664
Computer image analysis and artificial neuron networks in the qualitative assessment of agricultural products
155 # 3665
The use of neural image analysis in the identification of information encoded in a graphical form
156 # 3687
Modernization of the wastewater control system in the food industry
16 # 759
An attempt to technological evaluation of a device for separating meat from animal bones with the use of computer image analysis
16 # 768
Effect of storage duration on physical properties of rye grain
16 # 773
Effect of storage duration under increased temperature on strength features of the apples
16 # 771
Size of wheat grains and rheological properties of dough
16 # 761
Testing the composition of loose two-ingredient mixture by using computer image analysis
18 # 1519
Application of a visual system for efficiency assessment of the process of dehulling of grain
18 # 1526
Application of computer image analysis for the parametrisation of the potato tuber tissue structure
18 # 1537
Application of computer image analysis in measurements of agricultural wheels deformation parameters
18 # 1528
Computer image analysis in in-situ experiments
18 # 1534
Damaging process of wheat grain under mechanical multiple impact
18 # 1524
Evaluation of the state of winter wheat crop-stand by using of computer image analysis
18 # 1536
Measurement of geometrical parameters of spruce seedlings needles by using video-computer technique
18 # 1532
Measuring the cutting tooth geometry of power saw chains and assessing the wear of saw chains using the method of image analysis
18 # 1535
Optical system aiding planimetrical measurements of seeds by using image analyses
18 # 1513
The cutting resistance as a measure of potato tubers resistance to mechanic damages - research stand description
18 # 1530
The use of computer-aided image analysis in the integrated forest inventory
19 # 1007
Computer aided dedsion making at microclimate control in potato stores
19 # 1008
Effect of linear drying shrinkages and shapes of solid bodies on their drying kinetics
19 # 1003
Effect of potato tuber load in bulk on their mechanical resistance
19 # 1004
Evaluating the operation quality of single-row and six-row sugar beet harvesters
19 # 997
Losses if chemical additives during application to green forage atpicking up with a roller-baler
21 # 484
Analysis of the losses and damages of carrot roots harvested with a Simon single-row harvester
21 # 510
Changes in construction and usage of the facilities of poultry keeping with reference to the EU regulations
21 # 487
Choice of technical means to maize cultivation for silage
21 # 503
Course of damaging seeds at mechanical harvest
21 # 505
Effect of rubberliner tension on intensity of bovine teat massage and vacuum stability
21 # 506
Impact of ear conveyor in Bizon combine harvester on harvesting process and losses of the rape seeds
21 # 492
Influence of proecological manuring technique on the quality of potato tuber yield
21 # 474
Preliminary estimation of transport utilization in the forests on an example of forestry transport division in Gorzów Wielkopolski
21 # 475
Preliminary estimation of transport utilization in the forests on an example of forestry transport division in Gorzów Wielkopolski
21 # 465
Process engineering attempt to renovation of the technical object – according to the ISO 9001/2000 standard
28 # 1602
A joint system of combined waste utilization and sewage treatment of Mura Biel in Switzerland
28 # 1613
he influence of technical infrastructure on the possibility of appoint new building areas
28 # 1607
Impact of water management in fish ponds on ground water levels in advancement arable lands
28 # 1601
Investigation of multi stage, on-site wetland type wastewater treatment plant located in mountain farm at Muszynka
28 # 1585
natural and technical infrastructure of the Zielonka Forest
28 # 1603
Planning, programming and designing of sewage systems in rural areas
28 # 1595
The economic analysis of the „Lemna"- type sewage treatment plant in Minnow district Świętokrzyskie province
28 # 1596
Water losses reduction in rural pipe nets as an important aspect of water management
31 # 1688
Geographic information systems in decision support for agriculture
31 # 1693
Proecological two-layer soil tillage combining the qualities ofploughing and no-tillage
31 # 1656
WWW pages ofInternet in management of communal areas
33 # 692
Errors in calculation of selected parameters of air treated as a drying agent using humidity meter with a psychometric sensor
33 # 688
Identification of assesment criteria of removing and storing manure in the aspect of environment protection requirements
33 # 615
Process Based Machinery Maintenance
33 # 641
The influence of a Simon harvester's operational parameters on the quality of carrot roots harvesting
35 # 899
A logistic system for transport management of currants
35 # 914
Internet decision support in integrated pest management in Poland
35 # 898
Modelling of delivery chain in discrete distribution and production conditions
35 # 884
Postreiational databases cache intersystems
35 # 892
Some ways of Software application in firms providing agricultural services
36 # 1071
Analysis of damage causes of reinforced conerete road pipe culves
36 # 1061
Assessment of the funcioning of mini treatment plant installed a village school at Rajbrot
36 # 1045
Ecological investments in choosen communes of Podarpacie province
36 # 1058
Ground filters as an element of morę thorough sewage treatment
36 # 1075
Influence of the surface water on the village system of building
36 # 1070
Insulating and drainage geocomposites used for damp proofing of buil-dings and elements of technical infrastructure
36 # 1062
Measurements of sewage flow rate in selected treatments plants of the Małopolska province
36 # 1072
Problems of water supply and sewage disposal management on rural areas on the example of the Żarnowiec district in the Silesia province
36 # 1042
Securing with storage reservoirs waterintakes from small watercourses for rural water supply systems
36 # 1063
Selected ecological aspects of rural household water use
36 # 1055
Sewage sludges-stabilization and agricultural-use
36 # 1052
Spatial distribution of technical infrastructure in the Świętokrzyskie voivodship
36 # 1054
The Małopolska voivodship saturation with water supply-and-sewage disposal infrastructure in 1990-2000
36 # 1060
The share of infiltration waters in domestic sewege outflow from rural se- werage systems
41 # 548
Environmental hazard and rural areas management
41 # 572
Local council’s capabilities in executing and financing infrastructural investments
41 # 568
Mining damages an arable lands – forecasting
41 # 550
Regional aspects of agrotourism development in the Małopolska province
41 # 573
The community funds of environment protection as a source of financing ecological village terrain areas infrastructure
41 # 570
The insurance of financial sources of investments in ecological infrastructure
41 # 563
Trends of transformation of village roads in Lover Silesia
41 # 549
Water reservoir in Nielisz as an example of pro-ecological investment
45 Tom I # 1103
Coefficients and criteria of sustainable development in aspect of spatial management
45 Tom I # 1101
Environmental protection activity in Sułkowice commune
45 Tom I # 1088
Influence of technical infrastructure, land use and management of the Dłubnia river basin on water quality
45 Tom I # 1094
Rationalization of use agricultural lands in micro-basin of Opatówka river
45 Tom I # 1111
Spatial distribution of retention changes in Zielonka Forest for the use of engineering works
45 Tom I # 1093
The evaluation of two BATEX household wastewater treatment plants with filter drain
45 Tom II # 1124
A problem of incidental waters in rural sewerage systems of the Małopolska province
45 Tom II # 1130
An assessment of closed water circuit efficiency in car washer using HDR-777 device
45 Tom II # 1146
Application of the SWOT analysis to evaluate the water-supply management in a commune
45 Tom II # 1133
Optimization of rural areas ecological infrastructure in Ukrainian-Poland frontier region in theoretical aspects
45 Tom II # 1122
The influence of building connection to combined sewerege system on volume of water consumed by rural households at Mszana Górna village
45 Tom II # 1128
Volume of domestic sewage and water consumption in rural households
51 # 1650
An energetic analisys of storage of head excess ouring heating of a foil tunnel
51 # 1626
Modelling processed in apple storage facility
51 # 1646
Multi-parameter eyalution of a combine harvester usage efficiency
51 # 1644
Potato agricultural technology leyer eyelauation in Ksiaz Wielki commune
52 # 815
Crop of corn straw and its energetic potential in mountainous areas following the example of Beskid Żywiecki
52 # 811
The analysis and evaluation of the energy consumption and the costs of various technologies of preparing soil for sowing
52 # 797
The number of members in a collective group in a case of collective utilization of agricultural machines in the opinion of farmers
53 # 594
Assessment of microwave stimulation of potato bulbs
53 # 593
Computer image analysis in drying shrinkage determination
53 # 600
Computer technique testing of cultivator draft
53 # 603
Film as instrument in seeds elasticity research
53 # 582
Partial application of computer based image analysis in modeling seed shapes
53 # 585
The influence of tractor wheel passes on morphometrical properties of soil under grassland
56 # 522
Developing of agricultural machines to meet the requirements of sustainable agriculture
56 # 526
Present state and development perspectives of the sewerage network on rural areas
56 # 518
Threats to natural environment on rural areas in aspect of technical infrastructure development rate
60 # 1563
Biodegradable biopolymers: materials for packaging
60 # 1574
The storage changes in curd cheese packed in parchment paper and paper and composite pe/pa foil
61 # 1166
Heat balance of an apple storage facility
61 # 1159
Lightweight, steel silo for agricultural products - Structure and assembly concept
61 # 1164
Monitoring handling of potatoes by pressure measuring sphare (PMS-60)
61 # 1176
Qualitative and quantitative analysis of waste from agricultural farm on the example of a community
62 # 704
An intranet database system enhancing research management within agricultural engineering
62 # 700
Analysis and classification of dried vegetables’ images with utilization of artificial neural networks
62 # 703
Identification of rock-bed thermal parameters random distribution as a result of probabilistic character of the storage charging process
63 # 1324
Analysis of traction properties of a microtractor wheel in various technologies of selected plants cultivation
63 # 1335
Assessment of economics and energy requirement of various technologies of soil preparation for winter rape planting
63 # 1330
Crop quality evaluation as an element of verification of the quality management system in sugar beet production
63 # 1334
Economical assessment and energy requirement of various technologies of winter rape production
63 # 1329
Physical and mechanical properties of loamy soil subsoil at two tillage systems
64 # 713
Connection between the content of nitrogen compound in potato tubers and their susceptibility to mechanical damage
64 # 737
Effect of sprinkler irrigation and nitrogen fertilization on yield and technological and storage value of potato cv. ‘Triada’
64 # 742
Equilibrium roughness of working surfaces as a criterion of quality for the estimation of the quality frictional pairs repair
64 # 716
Influence of the use of a drainage basin on physical and chemical properties of bottom sediments of lakes
66 # 1293
Digital image analysis in agricultural technology
66 # 1291
Elements of precision agriculture in plant protection
66 # 1282
Method of corrected, average price in farm tractor appraisal
67 # 931
Algorithm for identification of biological materials images
67 # 950
Analysis of microwave drying of root celery in conditions of decreased pressure
67 # 932
Computer system assisting identification of random distribution of the thermal parameters of stone regenerator
67 # 918
Dependence between the dry mass and starch content and the potato bulb mechanical damage indices
67 # 924
Effect of water contents changes on hardness of wheat grains during silo storage in modelling conditions
67 # 934
Feasibility study of physical methods for treating potato bulb diseases resulting from storage
68 # 1376
Application of computer image processing to determine the physical properties to potato tubers
68 # 1400
Application of computer technique to modeling and simulation of selected operations in forage harvester
68 # 1404
Computer test verifying the students’ knowledge
68 # 1363
Electronic-information system for monitoring, steering and management in poultry production and breeding
68 # 1388
Identification of rock-bed thermal parameters random distribution as a result of probabilistic character of the heat storage charging process
68 # 1387
Information system based on .NET and XML technologies for managing the research in agricultural engineering
68 # 1372
Information systems for the enterprises of technical farm service
68 # 1399
Monitoring of weighing and packaging goods by means of control charts
68 # 1362
Simulation model of the changes in temperature fields in a grain silo
68 # 1408
The effect of image resolution and compression on measurement error of cereal grain geometry and colour
69 # 871
Measuring equipment supervision in daires in the quality management process
69 # 848
The control and operation of structure creating process by using helix mixer
70 # 1223
Change models for electric energy demands in rural households
70 # 1185
Determination of optimum conditions for drying up partially withered green forage
70 # 1205
Determination of seeds sizes measurement error by using computer image analysis
70 # 1216
Effect of impulse eclectic field on storage losses of potato tubers
70 # 1215
Effect of variable magnetic field on storage losses of potato tubers
70 # 1211
Image recognition with artificial neuron networks
70 # 1198
Influence of chosen habitable agent's on planting tendril willow Salix Viminalis in mountain conditions
70 # 1193
Possibilities to use pigments during one-sided micro-section preparation for soil structure image analysis
71 # 1427
Determination of starch index in the apples by using of computer image analysis
71 # 1457
Effect of single-and two-stage grain crushing process on the quality of bruesed grain
71 # 1432
Flows of the agent in band driers for drying vegetables
71 # 1447
Grinding of grain in a crushing mill at one– and two stage process
71 # 1453
The effect of partial fat substitution for nutritive cellulose on the texture and sensory features of minced sausages
77 # 2
Computer systems for cow herd management
77 # 11
Evaluation of changes of selected mechanical parameters of soil in different technologies of tillage
77 # 8
Evaluation of traction propriety of tyres in simplified technologies of tillage
77 # 34
Some strength properties of rape seeds
78 # 49
Agrotechnical and economical effects of simplified soil cultivation for potatoes
79 # 125
Impact of working depth of the non-ploughing tillage system on service load
79 # 118
Influence of microwave vacuum parameters fruits chokeberry drying on the course of this process and drying shrinkage
79 # 116
The influence of microwave-vacuum drying parameters on shrinkage of strawberries during drying and on running of process
79 # 103
The influence of selected factors and measurement procedure on the formation of coefficient of longitudinal non-uniformity at horse bean seeds sowing
8 # 1030
Model studies on the effects of rye grain moisture content, duration of storage and silo "slenderness" on horizontal and vertical pressures
8 # 1033
Modelling of the kinetics of pumpkin dehydration
80 # 178
Impact water content in rapeseed and storage time on vertical pressure in silos
80 # 156
Information technologies in the farm management advisory systems
80 # 151
The influence of multiple passes on morphometrical properties of soil under grassland
80 # 173
Utilization of computer image analysis method in the assessment of the state of leaf on the example of norway maple (Acer platanoide.)
81 # 202
Capital intensity of preservation of fodder from pastures in the beskid niski area
81 # 214
Changes in impact strength of rape seeds as a result of being affected by microorganisms
81 # 194
Creating work safety culture in food industry plant
81 # 223
Losses and pod damage caused by double row harvester for string bean harvesting
81 # 191
Modelling of the oxygen decomposition process of silage
81 # 187
The influence of microwave radiation on the preservation constancy of potato tubers
82 # 246
Corelation between chosen parameters of air and maize grain dried with low-temperature method
82 # 260
Influence of wheat storage in a rectangular prism silo on grain hardness index
82 # 266
Temperature changes during heat treatment of chosen smoked sausages obtained by traditional method
82 # 261
Texture parametrs of non-glutene sponge cake with addition of chosen raising agents
86 # 329
Effect of feed preservation technology for feeds from grasslands for nutrient losses
86 # 340
Influence of the temperature on the quality of the grain in the process of drying with using natural sorbents
86 # 304
Level and dynamics of changes in outfit and usage of farm tractors on family farmsteads
86 # 322
The use of total productive management (tpm) system to increase performance of beer bottling line at the brewery
87 # 365
Applying a decision-making model in agricultural machinery operation
87 # 386
Assessment of the effect of using special insert on mixing process of granular systems by the funnel-flow system
87 # 396
Changes of non-uniformity of rape seeds sowing index as a result of some parameters and calculating procedures
87 # 406
Determining the purity of consumer seed with the help of computer analysis of the image
88 # 416
Assessment of survivalness of plant protective biological agents: nematodes - Steinernema feltiae sprayed by means of hydraulic nozzle
88 # 454
Damages to naked and covered barley during harvester cropping
88 # 436
Effect of owner's age on power installed in the farmsteads
88 # 425
Energy and labour input in different tillage system
88 # 435
Farmstead owner's age versus reconstruction value of the machine park
88 # 437
Function relations between farmers age and life of tractors used in the farmstead
88 # 462
Modeling drying shrinkage for selected root vegetables using neural networks
88 # 460
Modeling the threshing process when using artificial neural networks
88 # 457
Position for computer analysis of quality of agricultural and food products
88 # 429
Quality of raw product evaluated based on the degree of rape seed damage
88 # 424
Texture classification using Support Vector Machine
88 # 419
The dynamics of processes in squeezed tissues of red beet
88 # 447
XML as interface of outside communicating of information system simulating working of stone regenerator
90 # 1806
A decision support system in maize silage production
90 # 1788
Aiding the process of mixing heterogenous grain composite with insert of the Double Cone type
90 # 1781
Computer aid design of rotary tiller parameters. Part I – kinematics
90 # 1787
Computer image analysis in the grain configuration mixing estimation (Funnel-flow system)
90 # 1798
Describing the velocity of the moving vermin with the using computer analysis of the image
90 # 1767
System for automatic grass and weeds recognition
90 # 1792
The analysis of possibilities of predictions of soil dislocations during ploughing using standard statistical methods as well as artificial neural networks
91 # 1761
Effect of some factors on quality indices of loading digger
91 # 1757
Effect of tillage systems and weed control on the yield of winter wheat cultivated in monoculture
91 # 1741
Mortality of nematodes in hydraulic cyrculation of sprayer
91 # 1755
Some physical properties of soil and yielding of crops grown with different forms of mulching and tillage
91 # 1751
Technology of fertilization by leaves and protection of container cultivated decorative bushes with mycorrhiza
91 # 1762
Yielding of crops and changes in soil water retention under different systems of tillage
93 # 1825
A Method of measurement of number of contact points between seeds
93 # 1818
An application of selected methods of image analysis during the observation of starch decomposition in apples
93 # 1809
Crystalline structure characteristics of some polish honeys
93 # 1832
Mechanical properties of porous agar gels
93 # 1813
Selected properties of meat products stored in modified atmosphere of the different concentration of carbon dioxide and nitrogen
93 # 1851
The stability of structural qualities of milky fermented beverages
94 # 1893
Changes of potato bulb density caused by water transpiration and absorption during storage
94 # 1884
Distribution of component concentration in funnel-flow mixing within RSI system
94 # 1871
Identification of can bus data transfer protocol in agricultural vehicles
94 # 1887
Ocena energetyczno-ekonomiczna ogrzewania dendromasą
95 # 1925
Analysis of power supply voltage quality in rural farms
95 # 1922
Biofuels – EU requirements, needs andreal possibilities of production
95 # 1931
Damages of seeds of the coarse and fine grained lentil caused by the forage harvester
95 # 1915
Effectivity evaluation of beer bottling line upon introduction of total productive management (tpm) system
95 # 1910
Influence of storage time on potato bulb mass loss during peeling
95 # 1919
Influence of the green fodders harvesting on the quality of producing silages
95 # 1906
Measurement of selected operating parameters of cultivation unit
95 # 1926
Multiple-criteria selection of manure spreaders
96 # 1940
Method used to measure contact area between seeds
96 # 1950
Package management as the basic element of logistic infrastructure of agricultural farms
96 # 1944
Potato tuber cropping and susceptibility to mechanical damage related to hydrothermal coefficient
97 # 2006
Modelling problems for processes in potato store
97 # 1998
Relations between tuber density growth and selected potato properties during storage
98 # 1932
The microwave-vacuum drying model for fruit and vegetables
99 # 2019
Analysis of maize grain harvesting and conservation inputs
99 # 2058
Characteristics of topsoil layers damage during wood skidding with farm tractors in thinning pine-stands
99 # 2020
Concentration of biological plant protection agents in wheelbarrow sprayers
99 # 2048
Determination of relation between potato tuber resistance to mechanical damage and size of microwave radiation dose
99 # 2060
Effect of storing time of wheat grain on changes in its quality properties
99 # 2064
Effect of the tillage system, seeding rate and sowing term on the yield of winter wheat cultivars
99 # 2031
Neural model allowing to locate defects in injection pumps
99 # 2028
Safe grain storage – the study of the issue
99 # 2055
Some environmental and production conditions concerning simplified modes of tillage
99 # 2037
Storage analyze of minimally processed apples
99 # 2061
Storage of fuel woods chips
99 # 2044
The impact of dryling methods and parameters on changes in dried fruit and vegetables colour
If you see any errors, please contact: Redakcja PTIR