The objective of the paper was to formulate and construct the control and stabilization system of absolute pressure, supplying autonomous milking unit. This system may also be used in different solutions basing on the so-called quarter milking, however, one requirement must be met - suction pressure is individually supplied to each cup operating a quarter of an udder. The scope of the paper included: developing the concept of the control system, construction of a real facility, programming PLC controller for the accepted control algorithm (basing on the previous scientific research of authors) and verification of the system operation on the laboratory stand. The main element of the control system is a microprocessor controller, where algorithm of pressure control, with the use of fuzzy logic, was programmed. Results of the experimental research allowed a positive assessment of the described technical solution.