The objective of the paper was comparison of the selected metrologic parameters of two types of thermistors: without a shielding material made of acid-proof steel. The research was carried out in laboratory conditions with the use of the computer test stand, developed for the research needs. Comparative analysis of temperature sensors was carried out with the use of Heavside's jump function method carried out with the use of the programmed pump controller and a recorder of measuring signals of high resolution. The tests proved higher sensibility of a thermistor without additional shield in comparison to the sensor structure with additional shield made of acid-proof steel. The highest values of sensibility of the researched temperature sensors were obtained at short intervals in the liquid flow.